The InAir™ IA25TWHRV is an extremely versatile high efficency thru the wall heat recovery unit Based on the same performance as the A60-TWHRV but requiring a smaller wall hole size.
Each unit can operate either individually as a single room heat recovery unit or collectively to provide a house ventilation solution.
The InAir™ IA25TWHRV unit can also operate as extractor fan, positive input ventilation unit or in a continually operating 'cycled' Heat Recovery Mode. For best results in larger rooms they should be installed in pairs.
The InAir™ Heat Recover units will provide targeted humidity and condensation solutions and reduce damp that will provide a healthier, more pleasant and safer living environment as well as reducing damage to the building fabric.
When in Heat Recovery mode, up to 90% of the room heat is recovered and put back into the incoming fresh air. Heat that would normally be wasted when using extract fans, reducing heating costs, good for the environment, your health and your wallet!
The IA25TWHRV has a G3 Pre-filter that can be removed and cleaned.
Our residential IA25 HRVs are the best choice for ventilating homes or workplaces. These units are designed to provide fresh air into the building while exhausting an equal amount of stale air to the outside. During the winter season, heat recovery ventilators (HRVs) replaces stale air with fresh pre warmed air throughout homes and businesses, helping prevent moisture build-up, toxic mold and rot.
Principal benefits;
- Provision of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises.
- Reducing heat losses caused by ventilation due to heat recovery with ceramic thermal efficiency of up to 90%..
- Humidity balanced and regulated air exchange to create individually controlled microclimate.
- The units have control button incorporated in the body of the unit in addition to Wi-Fi and remote control features as standard.
- Ultra-low power requirement from 1.8Watts (0.019A) to 6Watts (0.05A)
Filter upgrade option includes;
- HEPA Filter- Captures 99.97%* of airborne allergens including; pollen, mould spores, dust, pet dander, microbes, and smoke (particles as small as 0.3 microns in size).
- AOC (Advanced Odour Control) Carbon Filter - Reduces VOCs and household odours from cooking, pets, and smoke. It is designed to catch airborne particles found indoors, which also helps prolong the True HEPA Filter life.
Specification
|
Model |
InAir IA25TWHRV |
|
Product Type |
Thru-the-wall Heat Recovery Unit |
|
Colour |
White |
|
Material |
ABS |
|
Noise (dB) |
20-33dB |
|
Airflow (m³/h) |
48 - 60 m³/h |
|
Heat Recovery rate % |
Up to 90% |
|
Voltage/frequency |
220VAC/50Hz (Class 1) |
|
Power (W) |
7W |
|
Controls |
Remote Control |
|
Filter |
G3 (Carbon and HEPA Optional) |
|
Heat Exchanger |
Ceramic |
|
Size |
245 x 245 x (L250 - 500mm) Hole Size 125Ømm |
|
Room size |
Up to 25m² |
|
Functions |
Fresh Air Recovery/Extract/Intake |
|
Speeds |
High/Medium/Low |
|
Heat recovery Mode |
65 Sec. In and Exhaust Cycles |
|
Weight |
2.8 kgs |
|
Warranty |
2 Years |
|
Protection |
IPX2 |
General Data
|
Speed |
I |
II |
III |
|
Voltage (V) 50Hz |
220V |
220V |
220V |
|
Ventilator Power (W) |
1.8 |
3.9 |
7.0 |
|
Max. Ventilator Current (A) |
.019 |
.034 |
.0533 |
|
Max air Capacity m³/h |
48 |
54 |
60 |
|
RPM (min) |
651 |
956 |
1261 |
Installation Recommendations
| Wall thickness | 250mm to 500mm. (125 Ømm) |
| Best wall position | 1.3M to 1.5M from room floor |
*PLEASE NOTE THIS IS A SINGULAR UNIT.
Replacement filters can be purchased here.
What Do The NHS Say?
Moulds produce allergens (substances that can cause an allergic reaction), irritants and, sometimes, toxic substances. Inhaling or touching mould spores may cause an allergic reaction, such as sneezing, a runny nose, red eyes and skin rash. Moulds can also cause asthma attacks. Click Here to see the NHS information